Re: Does the solarwinds scp/sftp server support key sharing? Trying to backup...
Hi, Have you found the way to download .tgz file?
View ArticleClik here to view.
Re: Monitor file in windows server
Hi Mharvey, I tested your power shell command, from sap server i get the correct response: [Thr 4992] <<- ERROR: SapSSLSessionStart(sssl_hdl=000000001AF86D30)==SSSLERR_PEER_CERT_UNTRUSTED[Thr...
View ArticleClik here to view.
Re: Help with kiwi snmp trap
Mmm..I did download the last DB from kiwi syslog and download the Juniper and APC Mibs and now it'sKiwiSyslog\Syslogd\MIBs run the EXE stop/start the server. One more "problem"I need to forward...
View ArticleRe: LEM- No information is being display on the customize report
Hi All, thank you so much for the reply. I managed to resolve the problem. " No information is being display on the customize report" by replacing the genericalert.insertion time to...
View ArticleRe: Monitor file in windows server
Hi, Do you know why the status is failed ? Today i will find out with the sap administrator what he want from the log file. Thanks Regards
View ArticleRe: LEM Customized Report
While I can't really help you with this problem, it actually seems like a really good feature request for the product to be able to do this out of the box.
View ArticleClik here to view.
Re: NPM devices in NCM config
If you're on NCM 7.3.1 or above, here is the setting to see what's managed by NCM or not. Group nodes by NCM - Licensed.
View ArticleRe: SAM script to ping a host from another host
I had a Windows version of thisRemote Ping I went ahead and put together one for LinuxRemote Ping via Linux
View ArticleRe: Monitoring two interfaces, triggering when traffic volume matches
If the secondary port normally only runs around 2-3KB/sec, you could just write an alert that alerts you when utilisation goes over say 1MB/sec. If you add something unique to the "secondary"...
View ArticleClik here to view.
Re: Creating a report comparing Running Config versus Starting Config.
I get a compare email as part of my weekly config backups. At 1am I backup all the Startup configs. At 2am I backup all the Running configs. As part of this backup Running configs job, I get it to...
View ArticleRe: F5 Alerts
This is something we are working on and it should be available in next major version.
View ArticleClik here to view.
Re: Fortinet backup full-config issue with CatTools
You can see below the result of the Backup.running.Config
View ArticleClik here to view.
Re: Warning about using multiple tabs for editing anything in NPM
Thanks! Did exactly the same "mistake". This saved the day.
View ArticleRe: Looking for query/report to show switchports that have not been used since
Have you considered UDT (User Device Tracker)? You can see a sample UDT report that is pretty close to what you are after...
View ArticleRe: NCM 6.1 and NETOPIA Routers
What is the prompt to enter the user name? You can also turn on Session Tracing from the NCM Win32 console, and look at the session trace logs and swTelnet log under the NCM installation folder.
View ArticleRe: NCM 6.1 and NETOPIA Routers
HG, There is no prompt when attempting to validate crdentials. As for the NCM Win32 console; either NCM v6.1 does not have that component or it's an add on feature that wasn't purchased with our...
View ArticleRe: NCM 6.1 and NETOPIA Routers
I meant if you were to telnet manually from Putty, what is the prompt to enter to user name?NCM Win32 interface is most definitely there with NCM 6.1, and is part of the NCM installer. Simply browse...
View ArticleRe: NCM 6.1 and NETOPIA Routers
HG; Using Putty, once my session is connected, it ask for "name" then "password".As for NCM Win32 session traces, I've found the directory where all the logs are created "C:\Program Files...
View ArticleRe: SNMP vs WMI polling - pros and cons
Hello all, I'm looking for a definitive answer to just one thing. Which monitoring protocol, WMI or SNMP, will affect performance of the monitored Windows 2008R2/2012R2 the least? WMI or SNMP? In the...
View Article